Teledyne GFC-7001T - Trace CO Analyzer User Manual
Page 55
Advertising
Getting StartedTeledyne API – Model T300/T300M CO Analyzer
Teledyne
Analytical
Instruments
55
Figure 3-15:
Default Pin Assignments for CPU COM Port connector (RS-232)
RS-232
C
OM
P
ORT
D
EFAULT
S
ETTINGS
Received from the factory, the analyzer is set up to emulate a DCE or modem, with Pin
3 of the DB-9 connector designated for receiving data and Pin 2 designated for sending
data.
RS-232 (COM1): RS-232 (fixed) DB-9 male connector.
Baud rate: 115200 bits per second (baud)
Data Bits: 8 data bits with 1 stop bit
Parity: None
COM2: RS-232 (configurable to RS-485), DB-9 female connector.
Baud rate: 19200 bits per second (baud)
Data Bits: 8 data bits with 1 stop bit
Parity: None
Advertising