Allied Telesis AT-S63 User Manual
Page 132
Advertising
Chapter 7: Port Parameter Commands
132
Section I: Basic Operations
Down - The port and the end node have not established a link.
unknown - The port status is unknown.
ifLinkUpDownTrapEnable - Whether or not link traps have been
enabled for the port, one of the following:
Enabled - Link traps are enabled. To disable link traps, see “DISABLE
INTERFACE LINKTRAP” on page 113.
Disabled - Link traps are disabled. To enable link traps, see “ENABLE
INTERFACE LINKTRAP” on page 116.
Example
The following command displays information about port 21:
show interface=21
Advertising