Allied Telesis AT-S63 - Manual (Page 45)

45
Chapter 3
Basic Switch Commands
This chapter contains the following commands:
ˆ “DISABLE TELNET” on page 46
ˆ “ENABLE TELNET” on page 47
ˆ “PING” on page 48
ˆ “RESET SWITCH” on page 49
ˆ “RESET SYSTEM” on page 50
ˆ “RESTART REBOOT” on page 51
ˆ “RESTART SWITCH” on page 52
ˆ “SET ASYN” on page 54
ˆ “SET PASSWORD MANAGER” on page 55
ˆ “SET PASSWORD OPERATOR” on page 56
ˆ “SET SWITCH CONSOLETIMER” on page 57
ˆ “SET SYSTEM” on page 58
ˆ “SET TELNET INSERTNULL” on page 59
ˆ “SET USER PASSWORD” on page 60
ˆ “SHOW ASYN” on page 61
ˆ “SHOW CONFIG DYNAMIC” on page 62
ˆ “SHOW CONFIG INFO” on page 65
ˆ “SHOW SWITCH” on page 66
ˆ “SHOW SYSTEM” on page 69
Note
Remember to save your changes with the SAVE CONFIGURATION
command.