Allied Telesis AT-S63 - Manual (Page 83)

AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Operations 83
ENABLE SNTP
Syntax
enable sntp
Parameters
None.
Description
This command enables the SNTP client software on the switch. The
default setting for SNTP is disabled. With SNTP enabled, the switch will
obtain its date and time from an SNTP server, assuming that you have
specified a server IP address with “ADD SNTPSERVER
PEER|IPADDRESS” on page 80.
Example
The following command enables the SNTP client software:
enable sntp