Show garp – Allied Telesis AT-S63 User Manual
Page 518
Advertising
Chapter 29: GARP VLAN Registration Protocol Commands
518
Section VI: Virtual LANs
SHOW GARP
Syntax
show garp=gvrp
Parameter
garp
Specifies the GARP application to display. GVRP is
the only GARP application supported by the AT-9400
Series switches.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command displays current values for the following GARP application
parameters:
GARP application protocol
GVRP status
GVRP GIP status
GVRP Join Time
GVRP Leave Time
GVRP Leaveall Time
Port information
Mode
Example
The following command displays GVRP information:
show garp=gvrp
Advertising