Allied Telesis AT-S63 - Manual (Page 511)

511
Chapter 29
GARP VLAN Registration Protocol
Commands
This chapter contains the following commands:
ˆ “DISABLE GARP” on page 512
ˆ “ENABLE GARP” on page 513
ˆ “PURGE GARP” on page 514
ˆ “SET GARP PORT” on page 515
ˆ “SET GARP TIMER” on page 516
ˆ “SHOW GARP” on page 518
ˆ “SHOW GARP COUNTER” on page 519
ˆ “SHOW GARP DATABASE” on page 521
ˆ “SHOW GARP GIP” on page 522
ˆ “SHOW GARP MACHINE” on page 523
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on this feature, refer to Chapter 25,
“GARP VLAN Registration Protocol” in the AT-S63 Management
Software Menus Interface User’s Guide.