Allied Telesis AT-S63 - Manual (Page 79)

79
Chapter 5
Simple Network Time Protocol (SNTP)
Commands
This chapter contains the following commands:
ˆ “ADD SNTPSERVER PEER|IPADDRESS” on page 80
ˆ “DELETE SNTPSERVER PEER|IPADDRESS” on page 81
ˆ “DISABLE SNTP” on page 82
ˆ “ENABLE SNTP” on page 83
ˆ “PURGE SNTP” on page 84
ˆ “SET DATE” on page 85
ˆ “SET SNTP” on page 86
ˆ “SET TIME” on page 87
ˆ “SHOW SNTP” on page 88
ˆ “SHOW TIME” on page 90
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on SNTP, refer to Chapter 3, “Basic
Switch Parameters” in the AT-S63 Management Software Menus
Interface User’s Guide.