Allied Telesis AT-S63 - Manual (Page 229)

229
Chapter 15
Event Log and Syslog Server Commands
This chapter contains the following commands:
ˆ “ADD LOG OUTPUT” on page 230
ˆ “CREATE LOG OUTPUT” on page 232
ˆ “DESTROY LOG OUTPUT” on page 236
ˆ “DISABLE LOG” on page 237
ˆ “DISABLE LOG OUTPUT” on page 238
ˆ “ENABLE LOG” on page 239
ˆ “ENABLE LOG OUTPUT” on page 240
ˆ “PURGE LOG” on page 241
ˆ “SAVE LOG” on page 242
ˆ “SET LOG FULLACTION” on page 244
ˆ “SET LOG OUTPUT” on page 245
ˆ “SHOW LOG” on page 248
ˆ “SHOW LOG OUTPUT” on page 253
ˆ “SHOW LOG STATUS” on page 255
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on these features, refer to Chapter 12,
“Event Logs and Syslog Servers” in the AT-S63 Management
Software Menus Interface User’s Guide.