Set switch trunk – Allied Telesis AT-S63 User Manual
Page 164
Advertising
Chapter 10: Static Port Trunking Commands
164
Section I: Basic Operations
SET SWITCH TRUNK
Syntax
set switch trunk=
name
select=macsrc|macdest|macboth|ipsrc|ipdest|ipboth
Parameters
trunk
Specifies the name of the static port trunk.
select
Specifies the load distribution method. Options are:
macsrc
Source MAC address.
macdest
Destination MAC address.
macboth
Source address/destination MAC
address.
ipsrc
Source IP address.
ipdest
Destination IP address.
ipboth
Source address/destination IP
address.
Description
This command changes the load distribution method of an existing static
port trunk.
Example
The following command changes the load distribution method of a trunk
named “Load11” to source MAC address:
set switch trunk=Load11 select=macsrc
Advertising