Chapter 6, Snmpv2 and snmpv2c commands, R 6: snmpv2 and snmpv2c commands – Allied Telesis AT-S63 User Manual
Page 91
Advertising
Section I: Basic Features
91
Chapter 6
SNMPv2 and SNMPv2c Commands
This chapter contains the following commands:
“ADD SNMP COMMUNITY” on page 92
“CREATE SNMP COMMUNITY” on page 94
“DELETE SNMP COMMUNITY” on page 97
“DESTROY SNMP COMMUNITY” on page 99
“DISABLE SNMP AUTHENTICATETRAP” on page 101
“DISABLE SNMP COMMUNITY” on page 102
“ENABLE SNMP AUTHENTICATETRAP” on page 104
“ENABLE SNMP COMMUNITY” on page 105
“SET SNMP COMMUNITY” on page 106
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on this feature, refer to Chapter 5,
“SNMPv1 and SNMPv2c” in the AT-S63 Management Software
Menus Interface User’s Guide.
Advertising