Allied Telesis AT-S63 - Manual (Page 140)

Chapter 8: Port Statistics Commands
140 Section I: Basic Operations
RESET SWITCH PORT COUNTER
Syntax
reset switch port= port counter
Parameter
port Specifies the port whose statistics counters you want to
return to zero. You can specify more than one port at a
time. You can specify the ports individually (for
example, 5,7,22), as a range (for example, 18-23), or
both (for example, 1,5,14-22).
Description
This command returns a port’s statistics counters to zero.
Example
The following command returns the counters on ports 14 and 15 to zero:
reset switch port=14-15 counter