Allied Telesis AT-S63 - Manual (Page 523)

AT-S63 Management Software Command Line Interface User’s Guide
Section VI: Virtual LANs 523
SHOW GARP MACHINE
Syntax
show garp=gvrp machine
Parameter
garp Specifies the GARP application to be displayed.
GVRP is the only GARP application supported by the
AT-9400 Series switches.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command displays the following parameters for the GID state
machines for the GARP application. The output is shown on a per-GID
index basis; each attribute is represented by a GID index within the GARP
application.
ˆ VLAN
ˆ Port
ˆ App
ˆ Reg
Example
The following command displays GID state machines for all GARP
applications:
show garp=gvrp machine