Allied Telesis AT-S63 - Manual (Page 167)

167
Chapter 11
LACP Port Trunking Commands
This chapter contains the following commands:
ˆ “ADD LACP PORT” on page 168
ˆ “CREATE LACP AGGREGATOR” on page 169
ˆ “DELETE LACP PORT” on page 171
ˆ “DESTROY LACP AGGREGATOR” on page 172
ˆ “DISABLE LACP” on page 173
ˆ “ENABLE LACP” on page 174
ˆ “SET LACP AGGREGATOR” on page 175
ˆ “SET LACP SYSPRIORITY” on page 177
ˆ “SET LACP STATE” on page 178
ˆ “SHOW LACP” on page 179
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information and guidelines on LACP port trunks,
refer to Chapter 8, “Static and LACP Port Trunks” in the AT-S63
Management Software Menus Interface User’s Guide.