Allied Telesis AT-S63 - Manual (Page 23)

AT-S63 Management Software Command Line Interface User’s Guide
23
Version 2.0.0 Table 2 lists the new features in version 2.0.0 of the AT-S63 management
software.
Version 1.3.0
Table 3 lists the new features in version 1.3.0.
Table 2. New Features in AT-S63 Version 2.0.0
Feature Change Chapter
Internet Protocol version
4 packet routing with:
ˆ Routing interfaces
ˆ Static routes
ˆ Router Information
Protocol (RIP)
versions 1 and 2
New feature. Chapter 32, “Internet Protocol
Version 4 Packet Routing” on
page 547
Table 3. New Features in AT-S63 Version 1.3.0
Feature Change Chapter
Basic Switch
Commands Modified the SHOW CONFIG DYN
command to display the parameter
settings of individual switch
modules. Chapter 3, “Basic Switch
Commands” on page 45
Modified command:
“SHOW CONFIG DYNAMIC” on
page 62
802.1x port-based
network access control Added the following new features:
ˆ GUESTVLAN parameter for
supporting Guest VLANs.
ˆ VLANASSIGNMENT and
SECUREVLAN parameters for
supporting dynamic VLAN
assignments from a RADIUS
authentication server for
supplicant accounts.
ˆ MACBASED parameter for
supporting MAC address-
based authentication as an
alternative to 802.1x username
and password authentication.
Chapter 34, “802.1x Port-based
Network Access Control
Commands” on page 621
Modified command:
“SET PORTACCESS|PORTAUTH
PORT ROLE=AUTHENTICATOR”
on page 626
Management Access
Control List Simplified the commands for
managing the access control
entries in the Management ACL. Chapter 41, “Management ACL
Commands” on page 707