Allied Telesis AT-S63 - Manual (Page 431)

AT-S63 Management Software Command Line Interface User’s Guide
Section IV: SNMPv3 431
SHOW SNMPV3 TARGETPARAMS
Syntax
show snmpv3 targetparams= targetparams
Parameter
targetparams Specifies an SNMPv3 Target Parameters Table entry.
Description
This command displays SNMPv3 Target Parameters Table entries. You
can display one or all of the table entries.
Examples
The following command displays the SNMPv3 Target Parameters Table
entry called “snmpv3manager95”:
show snmpv3 targetparams=snmpv3manager95
The following command displays all of the SNMPv3 Target Parameters
Table entries:
show snmpv3 targetparams