Purge stp – Allied Telesis AT-S63 User Manual
Page 441
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
Section V: Spanning Tree Protocols
441
PURGE STP
Syntax
purge stp
Parameters
None.
Description
This command returns all STP bridge and port parameters to the default
settings. STP must be disabled in order for you to use this command. To
disable STP, see “DISABLE STP” on page 439.
Example
The following command resets the STP parameter settings to their default
values:
purge stp
Equivalent Command
set stp default
For information, see “SET STP” on page 442.
Advertising