Allied Telesis AT-S63 - Manual (Page 361)

361
Chapter 22
MLD Snooping Commands
This chapter contains the following commands:
ˆ “DISABLE MLDSNOOPING” on page 362
ˆ “ENABLE MLDSNOOPING” on page 363
ˆ “SET IPV6 MLDSNOOPING” on page 364
ˆ “SHOW MLDSNOOPING” on page 366
ˆ “SHOW IPV6 MLDSNOOPING” on page 368
Note
Remember to use the SAVE CONFIGURATION command to save
your changes on the switch.
Note
For background information on this feature, refer to Chapter 19,
“MLD Snooping” in the AT-S63 Management Software Menus
Interface User’s Guide.