Allied Telesis AT-S63 - Manual (Page 714)

Chapter 41: Management ACL Commands
714 Section IX: Management Security
PURGE MGMTACL
Syntax
purge mgmtacl
Parameters
None.
Description
This command deletes all access control entries from the Management
ACL.
Note
If you are remotely managing the switch from a Telnet management
session and the Management ACL is active, your management
session will end and you will be unable to reestablish it if you delete
all ACEs.
Example
The following command deletes all ACEs from the Management ACL:
purge mgmtacl