Add qos policy – Allied Telesis AT-S63 User Manual
Page 293
AT-S63 Management Software Command Line Interface User’s Guide
Section II: Advanced Operations
293
ADD QOS POLICY
Syntax
add qos policy=
value
trafficclasslist=
values
Parameter
policy
Specifies the ID number of the policy you want to
modify. You can modify only one policy at a time.
trafficclasslist
Specifies the new traffic classes of the policy. Traffic
classes already assigned to the policy are retained.
Separate multiple traffic classes with commas (e.g.,
4,11,12).
Description
This command adds traffic classes to an existing policy. The traffic classes
must already exist. Any traffic classes already assigned to the policy are
retained by the policy. To add traffic classes while removing those already
assigned, refer to “SET QOS POLICY” on page 320.
Example
This command adds the traffic class 16 to policy 11:
add qos policy=11
trafficclasslist=16