Allied Telesis AT-S63 - Manual (Page 401)

AT-S63 Management Software Command Line Interface User’s Guide
Section IV: SNMPv3 401
DESTROY SNMPv3 NOTIFY
Syntax
destroy snmpv3 notify= notify
Parameter
notify Specifies an SNMPv3 Notify Table entry.
Description
This command deletes an SNMPv3 Notify Table entry. After you delete an
SNMPv3 Notify Table entry, you cannot recover it.
Examples
The following command deletes an SNMPv3 Notify Table entry called
“systemtestnotifytrap.”
destroy snmpv3 notify=systemtestnotifytrap
The following command deletes an SNMPv3 Notify Table entry called
“engineeringinform1.”
destroy snmpv3 notify=engineeringinform1