Allied Telesis AT-S63 - Manual (Page 85)

AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Operations 85
SET DATE
Syntax
set date= dd-mm-yyyy
Parameter
date Specifies the date for the switch in day-month-year
format.
Description
This command sets the date on the switch. You can use this command to
set the switch’s date if you are not using an SNTP server. The AT-9400
Series switch has an onboard battery that maintains the date even when
the unit is powered off or reset.
Example
The following command sets the switch’s date to December 11, 2004:
set date=11-12-2004