Allied Telesis AT-S63 User Manual
Page 606
Chapter 32: Internet Protocol Version 4 Packet Routing
606
Section VII: Internet Protocol Routing
– BOTH: both version 1 and 2 packets
Auth - The form of authentication. Possible settings are:
– NONE: no password authentication
– PASS: plaintext password authentication
Password - The authentication password, displayed with asterisks. A
value of NOT SET in this column indicates the interface does not have
a password for RIP.
To add RIP to an interface, refer to “ADD IP RIP” on page 575. To modify
the RIP settings of an interface, refer to “SET IP RIP” on page 593.
This command is not available on the AT-9408LC/SP, AT-9424T/GB, and
AT-9424T/SP switches.
Examples
This command displays the RIP settings for all of the interfaces where RIP
has been added:
show ip rip
This command displays the RIP settings of the VLAN17-2 interface:
show ip rip interface=vlan17-2
The command does not display anything if the VLAN17-2 interface does
not have RIP.