Chapter 10, Static port trunking commands – Allied Telesis AT-S63 User Manual
Page 157
Advertising
157
Chapter 10
Static Port Trunking Commands
This chapter contains the following commands:
“ADD SWITCH TRUNK” on page 158
“CREATE SWITCH TRUNK” on page 160
“DELETE SWITCH TRUNK” on page 162
“DESTROY SWITCH TRUNK” on page 163
“SET SWITCH TRUNK” on page 164
“SHOW SWITCH TRUNK” on page 165
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information and guidelines on static port trunking,
refer to Chapter 8, “Static and LACP Port Trunks” in the AT-S63
Management Software Menus Interface User’s Guide.
Advertising