Allied Telesis AT-S63 User Manual
Page 34
Advertising
Chapter 1: Starting a Command Line Management Session
34
Section I: Basic Operations
Omit the letter “R” when specifying a redundant twisted pair port in a
command line command. For instance, to assign the description
“Sales server” to port 23R on an AT-9424T/GB switch, you enter:
set switch port=23 description=”Sales server”
Note
These guidelines do not apply to the SFP slots on the
AT-9408LC/SP switch and the XFP slots on the AT-9424Ts/XP and
AT-9448Ts/XP switches.
Advertising