Avaya Cajun P882 - Manual (Page 109)

Cajun P550/P880/P882 Switch User Guide
Configuring System Information
3-11
Setting One-Time Summer Time Hours Using the CLI
To set Summer Time Hours that are not based on a standard rule
using the CLI, enter the following command from Configure mode:
> (configure)# clock summer-time date
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Setting the System Clock
The system clock is used for setting traps, alarms, and other events
on the switch.
* Notes: You must set SNTP and Summer Time Hours before you
can set the system clock. Refer to "Enabling the Simple
Network Time Protocol (SNTP)" and "Setting Summer
Time Hours" earlier in this chapter.
The system clock does not automatically change with
Daylight Savings Time.
You can set the system clock from either the web agent or the CLI.
Setting the
System Clock
Using the Web
Agent To set the system clock using the web agent:
1. Select System Clock from the System > Configuration group
on the web agent window. The System Clock dialog box
opens (Figure 3-6).
Hour Enter a value to represent the hour when Summer Time
Hours start or end for One-time settings. The default value
is 00.
Minutes Enter a value to represent the number of minutes into the
hour when Summer Time Hours start or end for One-time
Summer Time Hours. The default value is 00 for both Start
and End minutes.
Table 3-2. One-Time Summer Time Hours Configuration continued
Parameter Definition