Avaya Cajun P882 - Manual (Page 443)

Cajun P550/P880/P882 Switch User Guide
Managing Intelligent Multicasting
16-17
3. Select the checkbox next to the static multicast session that
you want to delete.
4. Click DELETE to remove the static multicast session, or
CANCEL to ignore the operation.
Deleting Static
Multicast
Sessions Using
the CLI To delete a static multicast session using the CLI, enter the following
command from Configure mode:
cajun(configure)# clear intelligent-multicast
session <session-id>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Creating Static Client Ports
You can create and add static client ports using either the web agent
or the CLI.
* Note: You can only add static client ports to static sessions on
VLANs that the port is bound to or on sessions created
for All VLANs.
Creating Static
Client Ports
Using the Web
Agent To create a static client port using the web agent:
1. Select Static Sessions from L2 > Intelligent Multicast group on
the web agent window. The Static Multicast Sessions dialog
box opens (Figure 16-5).
2. Select the number from the Static Client Ports column. The
Static Multicast Sessions Client Ports dialog box opens
(Figure 16-8).
Figure 16-8. Static Multicast Sessions Clients Port Dialog Box
3. Enter the new port number to be added in the Port field,.
4. Click Add Client Port. The new port is added.