Avaya Cajun P882 - Manual (Page 376)

13-6
Chapter 13
Cajun P550/P880/P882 Switch User Guide
3. Configure the following parameters on the Add IPX RIP Filter
dialog box:
a. Select Backbone from the Interface
pull-down menu.
b. Enter 0 in the Precedence field.
c. Enter 10 in the Start Network field.
d. Enter 10 in the End Network field.
e. Open the Direction pull-down menu and select Outbound.
f. Open the Filter/Suppress pull-down menu and select
Enable.
g. Enter 0 in the Ticks and Hops fields.
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
The filter created in this example ensures that all advertising of
network 10 from the interface labeled Backbone is suppressed.
Example #2: Suppress Advertising of all Networks Except 10
To configure your switch to suppress the advertising of all networks
except network 10 on the IPX interface named Backbone, you must
first create two filters.
To create filter 1 from the web agent:
1. Select Filters in the Routing > IPX > RIP group on the web
agent window. The IPX RIP Filter dialog box opens (see
Figure 13-2).
2. Select Create to create a new filter. The Add IPX RIP Filter
dialog box opens.
3. Configure the following parameters:
a. Select Backbone from the Interface pull-down menu.
b. Enter 0 in the Precedence field.
c. Enter 10 in the Start Network field.
d. Enter 10 in the End Network field.
e. Select Outbound from the Direction pull-down menu.
f. Select Disable from the Filter/Suppress pull-down menu.