Avaya Cajun P882 - Manual (Page 240)

9-16
Chapter 9
Cajun P550/P880/P882 Switch User Guide
3. Refer to Table 9-4 to configure the Create Standard IP Access
List dialog box to filter or prioritize traffic:
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
Creating
Extended
Access Rules To create extended access rules:
1. Select Access Lists from the Routing > IP >Configuration
group on the web agent window. The IP Access List dialog
box opens (Figure 9-5).
* Note: The IP Access List dialog box displays all
standard and extended access rules that have
been created. If no rules have been created, the
following statement displays:
No IP Access
Rules are currently configured
.
2. Select Create Extended. The IP Extended Access Rule
Creation dialog box opens (Figure 9-7).
Table 9-4. Create Standard IP Access List Dialog Box Parameters
Parameter Allows you to ...
Access List Name Enter the alphanumeric name assigned to the newly-created
access list.
Access Rule Index Enter the sequence number for each new rule you create.
Note: Entering a new rule may override other rules. Review
your current configuration prior to creating new
access list rules:
Access Type Select the method of handling incoming datagrams based on
the IP access type from the following pull-down menu
options:
• Deny/Filter - Allows you to filter out traffic based on
the specified configuration.
• Permit/Fwd pri8 (high) to pri1 (low) - Allows you to
prioritize traffic based on the specified configuration.
• Permit/Fwd with no change in priority - Allows you
to forward traffic with no change in priority.
Source Subnet • Source Address - Enter the IP address of a subnet that
you want to deny or grant access to the switch.
• Source Address Wildcard - Enter a range of IP
addresses that you want to deny or grant access to the
switch. Place the number one (1) in the bit positions for
the IP addresses that you want to ignore.