Avaya Cajun P882 - Manual (Page 459)

Cajun P550/P880/P882 Switch User Guide
Managing Intelligent Multicasting
16-33
Modifying
LGMP Clients
Per VLAN Using
the CLI To modify LGMP clients per VLAN using the CLI, enter the following
command in Configure mode:
cajun(configure)# set lgmp client config <options>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Enabling/Viewing Cisco Group Management
Protocol (CGMP) Snooping
You can enable CGMP snooping using either the web agent or the
CLI.
Enabling/
Viewing CGMP
Snooping Using
the Web Agent To enable CGMP snooping and view its statistics using the web
agent:
1. Select CGMP Snooping from the L2 > Intelligent Multicast
group on the web agent window. The CGMP Snooping dialog
box opens (Figure 16-14).
*Note: You must enable intelligent multicasting on a
global basis activate CGMP snooping
configuration.
Figure 16-14. CGMP Snooping Dialog Box