Avaya Cajun P882 - Manual (Page 329)

Cajun P550/P880/P882 Switch User Guide
Configuring the OSPF Routing Protocol
11-11
4. Click CREATE to create the virtual link, or CANCEL if you
do not want to create the OSPF virtual link.
Creating OSPF
Virtual Links
Using the CLI To create a OSPF virtual link using the CLI, enter the following
command from Configure mode:
>(configure router: ospf) area <area-id> virtual-link
<router-id>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Hello Interval Time in seconds between the Hello packets that the
router sends on the virtual link. This value must be
the same for all routers attached to a common
network.
Dead Interval Time in seconds that a router's Hello packets have
not been seen before it's neighbors declare the
router down. This should be some multiple of the
Hello interval. This value must be the same for all
routers attached to a common network.
Authentication Type of authentication available for use on a given
OSPF interface. Authentication types include:
• None
• Simple Password
• MD5 Authentication
Authentication
Key Area's authentication key.
MD5 Key ID MD5 authentication key ID as a decimal value.
Table 11-4. Add OSPF Virtual Link Dialog Box Parameters continued
Parameter Defines the...