Avaya Cajun P882 - Manual (Page 434)

16-8
Chapter 16
Cajun P550/P880/P882 Switch User Guide
3. Refer to Table 16-2 for an explanation of the Router ports.
Table 16-2. Router Port Display/Configuration Dialog Box
Parameters
4. Select a router port from the Port column and click DELETE
to delete the port, or CANCEL to restore previous settings.
Displaying
Router Ports
Using the CLI To display router ports using the CLI, enter the following command
from Priv mode:
cajun# show intelligent-multicast router-port
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Configuring Static Router Ports
You can configure Static Router ports using either the web agent or
the CLI.
Configuring
Static Router
Ports Using the
Web Agent To configure a static router port using the web agent:
1. Select Global Configuration from the L2 Switching >
Intelligent Multicast group on the web agent window. The
Intelligent Multicast Global Configuration dialog box opens
(Figure 16-1).
*Note: You must enable intelligent multicasting on a
global basis to make your static router port
configuration active. See "Configuring Global
Intelligent Multicasting", earlier in this chapter.
Parameter Definition
Port Displays the router port in the multicast
session.
VLAN Displays the port VLAN of the router.
Application Displays the active applications of the
router port. The applications include:
• Mgmt (Static)
• IGMP
• LGMP
• CGMP