Avaya Cajun P882 - Manual (Page 373)

Cajun P550/P880/P882 Switch User Guide
Configuring IPX RIP Protocol
13-3
Configuring IPX
RIP Interfaces
Using the CLI To configure IPX RIP interfaces using the CLI, enter the following
command in Interface mode:
cajun(config-if: <if name>):# ipx rip
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Creating and Modifying IPX RIP Filters
You can create and modify IPX RIP filters from either the web agent
or the CLI.
Creating and
Modifying IPX
RIP Filters Using
the Web Agent To create and modify IPX RIP filters using the web agent:
1. Select Filters from the Routing > IPX > RIP group on the Web
Agent window. The IPX RIP Filters dialog box opens
(Figure 13-2).
Figure 13-2. IPX RIP Filters Dialog Box
2. Select CREATE to create a new filter. The Add IPX RIP Filter
dialog box opens (Figure 13-3).