Avaya Cajun P882 - Manual (Page 232)

9-8
Chapter 9
Cajun P550/P880/P882 Switch User Guide
Creating an IP
Interface Using
the CLI To create an IP interface using the CLI, enter the following
command in Configure mode:
cajun(configure)# ip address <ip-address> <mask>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Enabling IP Routing
You can enable IP Routing using either the web agent or the CLI.
Enabling IP
Routing Using
the Web Agent To enable IP routing using the web agent:
1. Select Global Configuration from the Routing > IP >
Configuration group on the web agent window. The IP
Global Configuration dialog box opens (Figure 9-3).
Figure 9-3. IP Global Configuration Dialog Box.