Avaya Cajun P882 - Manual (Page 218)

7-10
Chapter 7
Cajun P550/P880/P882 Switch User Guide
2. Sychronize the Primary and redundant CPUs. Refer to
Table 7-1 for more information on the CPU configuration
dialog box parameters).
3. Click SYNCHRONIZE to save the synchronization images and
configurations, or STATUS to refresh the status information
for both the Primary and redundant CPUs.
Synchronizing
the Primary and
Redundant
CPUs Using the
CLI To synchronize the Primary and redundant CPU’s using the CLI.
enter the following command in Priv mode:
> # cpu_redundancy sychronize
Refer to the Avaya P500/P880/P882 Switch Command Line Interface
Reference Guide for more details about this command.
Table 7-1. CPU Redundancy Configuration Information
Parameter Definition
Status Displays the functional status of the CPU modules.
Power-Up/
Reset Image Displays the running configuration image for each CPU
module.
APP1 • Version - Displays the current running version of
application 1 (APP1) for each CPU module. You
must use version 5.0 or greater in order to make
use of the router redundancy protocol.
• Checksum - Displays the TBD
APP2 • Version - Displays the current running version of
application 2 (APP2) for each CPU module. You
must use version 5.0 or greater in order to make
use of the router redundancy protocol.
• Checksum - Displays the TBD
Startup Config • Date/Time Modified - Displays the date and
time that the configuration (startup.txt) was
modified.
• Checksum - Displays the TBD.