Avaya Cajun P882 - Manual (Page 389)

Cajun P550/P880/P882 Switch User Guide
Configuring IPX SAP Protocol
14-11
3. Configure the following parameters:
a. Select an interface name from the Interface pull-down
menu.
b. Enter 0 in the Precedence field.
* Note: Any filter with a Precedence of 0 will always
override a filter with a precedence of 1 or
higher.
c. Enter ffffffff (which represents all networks) in the Net
field.
d. Enter 278 (which represents the type for NDS) in the Type
field.
e. Select Inbound from the Direction pull-down menu.
f. Select Disable from the Filter/Suppress pull-down menu to
ensure that NDS advertisements are not filtered.
g. Enter 0 in the Hops field to ensure that there is no override
in the transmission of data on the network.
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
Filter 2
Filter 2 ensures that all networks and service types are filtered for
the indicated interface.
1. Select Net Filters from the Routing > IPX > SAP group on the
Web Agent window. The IPX SAP Net Filters dialog box
opens (Figure 14-4).
2. Click CREATE to create a new filter. The Add IPX SAP Net
Filter dialog box opens (Figure 14-5).
3. Configure the following parameters:
a. Select an interface name from the Interface pull-down
menu.
b. Enter 1 in the Precedence field.
c. Enter ffffffff (which represents all networks) in the Net
field.
d. Enter ffff (which represents all services/types) in the Type
field.