Avaya Cajun P882 - Manual (Page 301)

Cajun P550/P880/P882 Switch User Guide
Configuring IP Routing
9-77
Enabling IRDP
on an Interface
Using the CLI To enable IRDP on an interface using the CLI, enter the following
command in Priv mode:
cajun# ip irdp
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Configuring Lightweight Directory Access
Protocol (LDAP)
LDAP allows you to access control lists that you can retrieve from a
database on an LDAP server and apply them to the
Cajun P550/P880/P882 switch.
You can also:
■
View LDAP statistics for the switch
■
Configure a primary and secondary LDAP server
■
Configure a search base for the switch to contact in response
to an LDAP request.
Configuring a secondary server ensures that LDAP requests can be
fulfilled if a primary server fails. The LDAP client sends a search for
access control lists to the primary server if the client finds the
primary server. The primary server retrieves the access lists from the
LDAP database and returns them to the switch’s LDAP client. If the
client does not find the primary server and if the primary server
does not respond after five retries, the client tries to connect to the
secondary server. If the secondary server fails after five retries, the
client times out. The LDAP client applies the access lists to manage
the way traffic is forwarded.