Avaya Cajun P882 - Manual (Page 171)

Cajun P550/P880/P882 Switch User Guide
Configuring Port Parameters
5-19
Configuring Physical Port Parameters on Fast Ethernet Ports
You can configure ports on a Fast Ethernet module using either the
web agent or CLI commands.
Configuring
Physical Port
Parameters
using the Web
Agent To configure ports on a Fast Ethernet module using the web agent:
1. Select Configuration from Modules & Ports group on the web
agent window. The Module Information dialog box opens
(Figure 5-4).
Figure 5-4. Module Information Dialog Box
2. Select the checkbox in the Slot column next to the Fast
Ethernet module on which you want configure the physical
port parameters.
3. Select the number in the Ports column for the Fast Ethernet
module that you want to configure. The Physical Port
Configuration window opens (Figure 5-5).