Avaya Cajun P882 - Manual (Page 336)

11-18
Chapter 11
Cajun P550/P880/P882 Switch User Guide
3. Click Refresh to reset the counters with the latest
information.
Displaying OSPF
Statistics Using
the CLI To display the OSPF global statistics using the CLI, enter the
following command in Priv mode:
cajun# show ip ospf stats
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Displaying OSPF Links
The OSPF link display provides information on the currently active
OSPF links. You can display the OSPF using either the web agent or
the CLI.
Area ID Area ID of the area in question. It has the function
of defining a summarization point for Link State
Advertisements.
SPF Runs Number of times that the intra-area route table has
been calculated using this area's link-state database.
Border Rtrs Total number of area border routers reachable
within this area. This is initially zero, and is
calculated in each SPF Pass.
AS Border
Rtrs Total number of Autonomous System border
routers reachable within this area. This is initially
zero, and is calculated in each SPF Pass.
LSAs Total number of link-state advertisements in this
area's link-state database, excluding AS External
LSAs.
LSA Chksum
Sum
(per area, not
globally) 32-bit unsigned sum of the LS checksums of the
external link-state advertisements contained in the
link-state database. This sum can be used to
determine if there has been a change in a router's
link state database, and to compare the link-state
database of two routers.
Table 11-6. OSPF Statistical Parameters continued
Parameter Displays the...