Avaya Cajun P882 - Manual (Page 385)

Cajun P550/P880/P882 Switch User Guide
Configuring IPX SAP Protocol
14-7
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
Example: Suppress Advertising of all Print Servers on
Interface Remote
To configure your switch to suppress the advertising of all Print
Servers (for example, type 7) on Interface Remote:
1. Select Name Filters from the Routing > IPX > SAP group on
the web agent window. The IPX SAP Name Filters dialog box
opens (Figure 14-2).
2. Click CREATE to create a new filter. The Add IPX SAP Name
Filter dialog box opens (Figure 14-3).
3. Configure the following parameters:
a. Select Remote from the Interface pull-down menu.
b. Enter 0 in the Precedence field.
c. Enter * (asterisk) in the Name field. The asterisk represents
a wildcard that applies to all server names.
d. Enter 7 in the Type field.
e. Select Outbound from the Direction pull-down menu.
f. Select Enable from the Filter/Suppress pull-down menu.
g. Enter 0 in the Hops field. This ensures that there is no
override in the transmission of data on the network.
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
* Note: This filter ensures that all advertising of any known print
server on Interface Remote will be suppressed.
Creating IPX
SAP Name
Filters Using the
CLI To create IPX SAP name filters using the CLI, enter the following
command from Priv mode:
cajun# ipx sap-name-filter <precedence>
<filter-name> <service-type>
{outbound|inbound|both} {filter| allow}
[<filter-hops>]
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.