Avaya Cajun P882 - Manual (Page 452)

16-26
Chapter 16
Cajun P550/P880/P882 Switch User Guide
Configuring the
LGMP Server
Using the CLI To configure the LGMP server using the CLI, enter the following
command from Configure mode:
cajun(configure)# set lgmp server <options>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Modifying the LGMP Server Display per VLAN
You can modify the LGMP server display per VLAN using either the
web agent or the CLI.
Modifying the
LGMP Server
Display per
VLAN Using the
Web Agent To modify the LGMP server display per VLAN using the web agent:
1. Select LGMP Snooping from the L2 > Intelligent Multicast
group on the web agent window. The LGMP Server
Configuration dialog box opens (see Figure 16-9).
*Note: You must enable intelligent multicasting on a
global basis to activate your LGMP server per
VLAN configuration.
2. Select the number from the LGMP Servers column. The
LGMP Server Display per VLAN dialog box opens (Figure 16-
11).
Figure 16-11. LGMP Server per VLAN Dialog Box.