Avaya Cajun P882 - Manual (Page 129)

Cajun P550/P880/P882 Switch User Guide
Using VLANs, Spanning Tree, Hunt Groups, and VTP Snooping
4-13
Managing
Spanning Trees
Using the CLI To manage spanning trees using the CLI, enter the following
command from Configure mode:
> set spantree config
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Configuring Spanning Tree Bridge Ports
You can configure Spanning Tree Bridge Ports using either the web
agent or the CLI.
Configuring
Spanning Tree
Bridge Ports
Using the Web
Agent To configure spanning tree bridge ports using the web agent:
1. Select Spanning Tree from the L2 Switching group on the web
agent window. The Spanning Tree Information dialog box
opens (Figure 4-6).
2. Select the port number listed in the Bridge Ports column. The
Spanning Tree Per Module Bridge Port Information dialog
box opens (Figure 4-5).
Figure 4-8. Spanning Tree Per Module Bridge Port Dialog Box