Avaya Cajun P882 - Manual (Page 433)

Cajun P550/P880/P882 Switch User Guide
Managing Intelligent Multicasting
16-7
Configuring
Global
Intelligent
Multicasting
Using the CLI To configure intelligent multicasting globally using the CLI, enter
the following command from Configure mode:
cajun(configure)# set intelligent-multicast
{enable}
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Displaying Router Ports
You can display router ports using either the web agent or the CLI.
Displaying
Router Ports
Using the Web
Agent To display router ports using the web agent:
1. Select Global Configuration from the L2 Switching >
Intelligent Multicast group on the web agent window. The
Intelligent Multicast Global Configuration dialog box opens
(Figure 16-1).
*Note: You must enable intelligent multicasting on a
global basis to make your router ports active. See
“Configuring Global Intelligent Multicasting”,
earlier in this chapter.
2. Select Display/Configure Router Ports. The Router Port
Display/Configuration dialog box opens (Figure 16-2).
Figure 16-2. Router Port Display/Configuration Dialog Box