Avaya Cajun P882 - Manual (Page 514)

A-4 Cajun P550/P880/P882 Switch User Guide
Downloading a Software Image Using the CLI
To download the version 5.0 software image from a TFTP server to
an APP location using the CLI, enter the following command in
legacy-cli mode:
> fep get
This command reads and displays information
about the software image currently stored
in APP1 and APP2.
> download <APPname> <IP address> <file name>
Refer to the Cajun™ P550™/P880 Command Line Interface
Reference Guide for Version 5.0 for details about these commands.
Selecting the Image for Reboot
You can view and power-up the downloaded software image using
either the web agent or the CLI.
Selecting the Image for Reboot Using the Web Agent
To view and power up the downloaded image using the web agent:
1. Select FEPROM from the System > Memory group on the web
agent window. The FEPROM dialog box opens (Figure A-2).