Avaya Cajun P882 - Manual (Page 362)

12-16
Chapter 12
Cajun P550/P880/P882 Switch User Guide
Modifying IPX
Static Service
Using the CLI To modify an IPX static service using the CLI, enter the following
command in Priv mode:
cajun(configure)# ipx service <service-type>
<service-name> <network> <node> <socket>
<network.next-hop-node> <hops>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Monitoring Your Switch Using IPX
This section explains how to use IPX to do the following on your
switch:
■
Examine IPX Global Statistics
■
Search the IPX Route Table
■
Examine the IPX Route Table
■
Examine IPX Route Table Statistics
■
Search the IPX Service Table
■
Examine the IPX Service Table
■
Examine IPX Service Table Statistics
Examine IPX Global Statistics
IPX Global Statistics count only the IPX packets that are received by
or sent from the Supervisor module, not those packets routed in
hardware.
You can examine the IPX Global statistics using either the web agent
or the CLI.
Examine IPX
Global Statistic
Using the Web
Agent To examine the global IPX routing statistics using the web agent:
1. Select Global Statistics from the Routing > IPX > Display
group on the Web Agent window. The IPX Routing Global
Statistics dialog box opens (see Figure 12-9).