Avaya Cajun P882 - Manual (Page 180)

5-28
Chapter 5
Cajun P550/P880/P882 Switch User Guide
5. Refer to the "Configuring Physical Port Parameters on Gigabit
Ports Using the Web Agent" and/or "Configuring Physical
Port Parameters on Gigabit Ports Using the CLI" sections
earlier in this chapter and configure the port parameters as
described in those chapters.
6. Click APPLY to save your changes, or Restore to restore
previous settings.
Viewing Switch Port Parameters
You can view switch port parameters through either the web agent
and the CLI.
Viewing Switch
Port Parameters
Using the Web
Agent To view switch port parameters using the web agent:
1. Select Configuration from the Modules & Ports group of the
web agent window. The Module Information dialog box
opens (Figure 5-7).
2. Select the checkbox in the Slot column for the gigabit module
that you want to configure.
3. Select the switch ports for that module from the Switch Ports
column. The Switch Ports dialog box opens
(Figure 5-10).
Figure 5-10. Switch Ports Dialog Box