Creating ospf areas, Creating ospf areas using the web agent – Avaya Cajun P882 User Manual
Page 322
Advertising
11-4
Chapter 11
Cajun P550/P880/P882 Switch User Guide
Creating OSPF Areas
You can create OSPF areas using either the web agent or the CLI.
Creating OSPF
Areas Using the
Web Agent
To create OSPF areas using the web agent:
1. Select Areas from the Routing > IP > OSPF group on the web
agent window. The OSPF Areas dialog box opens (Figure 11-
2).
Note: The Area ID 0.0.0.0 is a backbone area and always
exists in an OSPF configuration.
Figure 11-2. OSPF Areas Dialog Box
2. Click CREATE. The Add OSPF Area dialog box opens
(Figure 11-3).
Figure 11-3. ADD OSPF Area Dialog Box
Advertising