Avaya Cajun P882 - Manual (Page 457)

Cajun P550/P880/P882 Switch User Guide
Managing Intelligent Multicasting
16-31
Enabling/
Viewing an
LGMP Client
Using the CLI To enable an LGMP client using the CLI, enter the following
command from Configure mode:
cajun(configure)# set lgmp client enable
To view the LGMP client statistics using the CLI, enter the following
command from User mode:
cajun# show lgmp client config
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Modifying LGMP Clients Per VLAN
You can modify LGMP client per VLAN using either the web agent
or the CLI.
Modifying
LGMP Clients
Per VLAN Using
the Web Agent To modify LGMP clients per VLAN using the web agent:
1. Select LGMP Server from the L2 > Intelligent Multicast group
on the web agent window. The LGMP Client Configuration
dialog box opens (Figure 16-12).
*Note: You must enable intelligent multicasting on a
global basis to activate your LGMP client per VLAN
configuration.
2. Select the number from the LGMP Clients field. The LGMP
Client Display per VLAN dialog box opens (Figure 16-13).
Figure 16-13. LGMP Client Display per VLAN Dialog Box