Enabling vrrp on an interface, Enabling vrrp on an interfere using the web agent – Avaya Cajun P882 User Manual
Page 293
Cajun P550/P880/P882 Switch User Guide
Configuring IP Routing
9-69
Enabling VRRP on an Interface
You can enable VRRP on an interface using either the web agent or
the CLI.
* Note: You must first enable VRRP globally before you can
enable VRRP on an interface. Refer to the "Globally
Enabling VRRP" section.
Enabling VRRP
on an Interfere
Using the Web
Agent
To enable an VRRP on an interface using the web agent:
1. Select Interfaces from the Routing > IP > Configuration group
on the web agent window. The IP Interfaces dialog box opens
(Figure 9-31).
* Note: Due to the length of the IP Interfaces dialog box,
it is divided into two figures in Figure 9-31.
Figure 9-31. IP Interface Dialog Box
2. Select the interface that you want to enabled.
3. Select Enable from the VRRP field pull-down menu for the
interface you selected.
4. Click APPLY to save your changes, or CANCEL to restore
previous settings.