Avaya Cajun P882 - Manual (Page 312)

10-2
Chapter 10
Cajun P550/P880/P882 Switch User Guide
Figure 10-1. RIP Global Configuration Dialog Box
2. Refer to Table 10-1 to configure the RIP Global Configuration
dialog box parameters:
3. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Table 10-1. RIP Global Configuration Dialog Box Parameters
Parameter Allows you to...
Global RIP Enable or disable the RIP protocol. The default is Enable.
Update Timer Enter the value (in seconds) that represents the time between
RIP updates on all interfaces. The default value is 30 seconds.
Purge TTL Enter the global Time To Live (TTL) in seconds that the RIP
update persists. The default value is 120 seconds.
Triggered
Updates Disable route updates that were triggered by a topology
change in the network to be added to the routing table. The
default is Enable.
Update Pkt
Delay Enter the value (in seconds) that represents the time delay
between successive RIP update packets to the neighbor, when
the update requires multiple packets. The default value is 0
seconds (no delay).