Configuring the fowarding cache using the cli – Avaya Cajun P882 User Manual

Page 482

Advertising
background image

18-4

Chapter 18

Cajun P550/P880/P882 Switch User Guide

3. Click ...

APPLY to save your changes

CANCEL to restore previous settings

REFRESH to update your system configuration

CLEAR to reset all configuration parameters to zero.

Configuring the
Fowarding
Cache Using the
CLI

To configure the forwarding cache using the CLI, enter the following
command from Configure mode:

cajun(configure)# ip multicast route-cache

<options>

Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0
for details about these commands.

Age
Interval

IP Unicast

IP Multicast

IPX

The IP unicast, IP multicast, or IPX
protocols forwarding table entry aging
period (in seconds). The default value is
120 seconds.

Maximum
Entries

IP Unicast

IP Multicast

IPX

The number of active entries in the IP
unicast, IP multicast, or IPX protocol
forwarding table. This is the maximum
number of active entries per fabric port.
Additional flows are forwarded by the
supervisor module. The default value is
15000.

Table 18-1. Layer-3 Forwarding Cache Configuration Dialog Box

Parameters for Tree Configuration Continued

Tree Configuration Continued

Field...

For the

protocol...

Allows you to...

Advertising